Sand Blast Hose

Description

Sand Blast Hose

PRODUCT DESCRIPTION

The Sand Blast Hose is used for conducting sand, steel, shot or other abrasives at high velocity, often in conjunction with blasting, cleaning or finishing stone, metal, and other surfaces.

Construction consists of thick plies of an abrasion resistant, static-conducting tube, with a black abrasion resistant cover. Used with OD mounted sand blast couplings.

Temperature range is -25F to 180F.

       Subject of  entry Index Specifications Hose lining The outer rubber
Tensile strength Mpa%≥ 15.0 13.0
Derrick wagon crane Mpa%≥ 530 320
Test conditions for hot air 70℃*72H Variation of tensile strength % ±25
Elongation at break % +10-30
The wear volume(cm?)≥ 0.35
The adhesion strength between the layers≥ 2.0
ID (mm) ID (inch) OD (mm) PLIES Working pressure
(psi) (bar)
13 1/2 1*1/32 2 150 10
19 3/4 1*3/8 2 150 10
25 1 1*9/16 2 150 10
32 1-1/4 1*27/32 2 150 10
38 1-1/2 2*1/8 2 150 10
51 2 2*11/16 2 150 10

Reviews

There are no reviews yet.

Be the first to review “Sand Blast Hose”

Your email address will not be published.