Description
QYB140-14L pneumatic oil pump is a high pressure and large displacement oil pump that converts air pressure into hydraulic power. It is controlled by pneumatic components and is mainly used in systems that use hydraulic oil as the medium. When the electric pump fails, the power is cut off or the power is not allowed, the oil pump can be started, and the hydraulic system can be quickly filled with oil. It is an auxiliary pump on the BOP control device.
| 1:200 Pneumatic Pump (QYB140-14L) | ||||
| In repair kit | (Item) | (Part No.) | (Description) | Qty |
| 1 | 150QMD-00-01 | 气缸头 Cylinder Head | 1 | |
| ▲ | 2 | 150QMD-00-06 | 定位弹簧Trip Spring | 2 |
| 3 | 150QMD-00-07 | 定位弹簧套Trip Spring Retainer | 2 | |
| 4 | 150QMD-00-08 | 定位螺栓Bolt | 2 | |
| 5 | LJJ-02D-01 | Z 1/2-M22×1.5 接头Adapter | 2 | |
| 6 | LJJ-02D-03 | 卡子Fastener | 2 | |
| 7 | LJJ-02D-02 | 螺母Nut | 2 | |
| 8 | 150QMD-00-10 | 丝堵及连接螺栓Adapter Exhaust Plate | 2 | |
| 9 | 150QMD-00-05 | 梭阀套valve sleeve | 1 | |
| 10 | 150QMD-00-02 | 双头螺栓Stud Bolt | 1 | |
| 11 | 150QMD-00-03 | 迫件Upper valve keeper | 1 | |
| ▲ | 12 | 150QMD-00-04 | 梭阀Air Valve | 1 |
| 13 | 150QMD-00-11 | 迫件Lower valve keeper | 1 | |
| 14 | 150QMD-00-12 | 托环Bushing | 1 | |
| 15 | QM19-28 | 上 盖 Template Cylinder head | 1 | |
| 16 | QM19-34 | 气缸垫Gasket | 2 | |
| 17 | QM19-15 | 锁紧螺母Piston Nut | 1 | |
| 18 | 150QMD-00-16 | 垫圈Washer | 1 | |
| 19 | QM19-14 | 气缸活塞Piston | 1 | |
| ▲ | 20 | QM19-35 193×8 | O形密封圈O-Ring | 1 |
| 21 | QM19-31 | 连通管Air Line | 1 | |
| ▲ | 22 | 150QMD-00-23 | 单头杆Single rod | 1 |
| 23 | 150QMD-00-21 | 弹簧座Spring Pedestal | 1 | |
| ▲ | 24 | 150QMD-00-22 | 换向弹簧Commutation spring | 1 |
| 25 | 150QMD-00-24 | 弹簧座Spring Pedestal | 1 | |
| 26 | 150QMD-00-28 | 活套Valve Trip Collar | 1 | |
| 27 | 150QMD-00-19 | 活塞杆Piston rod | 1 | |
| 28 | QM19-29 | 下 座Motor Base | 1 | |
| 29 | QB20-01 | 柱塞Plunger | 1 | |
| 30 | QM19-24 | 平垫Flat Washer | 2 | |
| 31 | 150QMD-00-30 | 螺母Nut | 1 | |
| 32 | QB20-02 | 调节螺母Setting Nut | 1 | |
| 33 | QM19-25 | 双头螺栓Stanchion | 2 | |
| 34 | QB210-02 | 油泵体pump tube | 1 | |
| 35 | QB20-04 | 盘根压垫Packing Washer | 1 | |
| 36 | QB20-06 | 隔 环Retainer | 2 | |
| ▲ | 37 | QB20-05 | 铅粉盘根lead sealing | 2 |
| 38 | QB20-07 | 柱塞扶正套plunger bushing | 1 | |
| 39 | QB20-10 | 平垫圈Flat Washer | 1 | |
| 40 | QB210-01 | 堵头Stopple | 1 | |
| ▲ | 41 | QB20-03 | 铅垫盘根lead sealing | 2 |
| 42 | 150QMD-00-37 | 标牌Sign | 1 | |
| 43 | QM19-27 | 盖 板Butt Plate | 2 | |
| 44 | QM19-30 | 缸筒Cylinder | 1 | |
| 45 | QM19-16 | 双头螺栓Bolt | 10 | |
| 46 | 150QMD-00-20 | 双母杵Inner-stud Bolt | 1 | |
| ▲ | 47 | 150QMD-00-38 | 密封环Gasket | 2 |
| 48 | 150QMD-00-09 | 挡气板Exhaust Plate | 2 | |
| In repair kit | 外购件(Item) | (Part No.) | (Description) | Qty |
| B1 | GB/T308-2002 16mm | 钢球Ball | 2 | |
| ▲ | B2 | GB1235-76 90×3.1 | O形密封圈O-Ring | 1 |
| ▲ | B3 | GB1235-76 32×3.1 | O形密封圈O-Ring | 1 |
| B4 | GB/T6176-2000 M20x1.5 | 螺母 Nut | 2 | |
| B5 | GB/T93-1987 20 | 弹簧垫圈Grower Washer | 2 | |
| ▲ | B6 | GB1235-76 35×3.5 | O形密封圈O-Ring | 1 |
| ▲ | B7 | GB1235-76 28×3.1 | O形密封圈O-Ring | 1 |
| B8 | GB/T95-2002 10 | 垫圈Gasket | 19 | |
| B9 | GB/T6171-2000 M10x1 | 螺母 Nut | 20 | |
| B10 | GB/T119.1-2000 6×18 | 圆柱销 Straight Pin | 2 | |
| ▲ | B11 | GB1235-76 13×1.9 | O形密封圈O-Ring | 1 |
| ▲ | B12 | GB1235-76 50×3.1 | O形密封圈O-Ring | 6 |
| B13 | GB/T6170-2000 M8 | 螺母 Nut | 1 | |
| B14 | Z1/2″丝堵 Bullnose | 1 | ||
| ▲ | B15 | GB1235-76 22×2.4 | O形密封圈O-Ring | 2 |
| B16 | GB/T5780-2000 M8x30 | 六角螺栓 Hexagon Head Bolt | 4 | |
| B17 | GB/T93—1987 8 | 弾黄垫圈Grower Washer | 4 | |
Our company has been in the oil & gas drilling equipment industry for over more years, We are here to serve all your drilling equipment needs.
Reviews
There are no reviews yet.